Friday, October 2, 2020

ArmorThane Trailer Coatings






If you use a trailer to haul your yacht, car, or even carry live critters, consider this question: How does it look on the interior?



If your answer is a little beat up, rusty, or damaged in any way, then this article is for you.

Trailers are meant to be used for heavy transport. And every time you use it, indications are it can receive some damage. Scrapes and scratches occur all the time. And the longer you use that trailer, the likelihood of more damage will occur progress.

What you need is to protect your investment. And the best way to do that is through a trailer coating from ArmorThane.





A TRAILER COATING THAT PROTECTS FROM WATER DAMAGE


Here's an example...

Let's say you use your trailer to haul your boat. This means your trailer is in contact with water much of the time. Constant water submersion can do some real harm to your trailer. Not only will you undergo rust and corrosion, but water damage can lead to structural damage to the trailer.

But with ArmorThane trailer coating installed on your boat trailer, you will preserve it from further water erosion. No more rust and corrosion, and that means a longer life for your trailer.



A TRAILER COATING THAT STOPS DINGS AND SCRATCHES

Just hauling anything around can cause damage to the interior of your trailer. And when you receive a scratch, that can lead to rust, leading to major damage down the line. But with a trailer protective coating from Marvel, you won't have to worry about dings and damage. That's because our coatings are impact resistant. So if your haul keeps banging around in the back of your trailer, the hard shell coating will protect your cargo and your trailer.




A TRAILER COATING THAT CLEANS EASILY

Let's face it -- hauling animals around is messy work. Don't you wish you can clean your trailer up in a snap? Well, you can help with an ArmorThane coating!



Our polyurea coatings are not only waterproof but dirtproof. It can keep your trailer clean and protects it from any animal waste. All you have to spray it down, and it looks like new!






A TRAILER COATING THAT RESISTS CHEMICALS

When you haul around a car, you may have to worry about damaging chemicals like oil and gasoline being spilled. These chemicals can seriously damage your trailer and shorten its total lifespan. But not if you have it protected!

An ArmorThane Coating is chemical resistant. This means no destruction will come to your trailer through any severe chemicals. And did we mention a trailer coating looks great?






CONTACT ArmorThane COATINGS TO LEARN MORE

If you have a trailer and want to protect it, you can't go wrong with a trailer coating from ArmorThane Industrial Coatings. So what are you waiting for? Contact them today for more information or to find the most proximate dealer.




at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Popular Posts


MCU

Let ArmorThane Build It Right

We want to make your coating jobs as convenient and fast as possible. That's why we design the trailer to your request or we'll help guide you through the layout and equipment choices based on your business plans. Options range from a smaller, low pressure configuration to a longer, two-room version that's fully outfitted with a high volume system.

Example Trailers

Industries and projects have difference requirements. Ask us for more details on these custom built examples:

  • Primary and Secondary Containment Unit – 36 Ft Gooseneck Trailer with resting berths and large chemical storage
  • Mining and Heavy Industry Unit – 30 Ft Gooseneck Trailer with multiple air tools from one large compressor
  • Residential and Commercial Coatings – 20 Ft Bumper Pull Trailer designed for easy-to-reach projects such as decks, animal enclosures
  • Foam-Focused Unit – 20 Ft Bumper Pull Trailer with long line sets reaching from the trailer
Each Mobile Coatings Unit comes complete with everything you need to get started AND keep going. Everything is included up front…

Projects are different from one applicator to the next. So, why buy a trailer designed for someone else? Instead, we customize the design of a trailer to fit your projects.

Our Coatings Units take power and equipment to any industrial, commercial or residential jobsite. Customers look to us for guidance, but the final choice of equipment and layout is yours. Options vary from a smaller, high or low pressure configuration to a longer, two-compartment version that’s fully outfitted with a high pressure system. Sizes typically range from 16' up to 36'.

MCU are Built to Take the Coatings Business Directly to the Job Site

Whether you decide to run completely mobile or simply add flexibility to a workshop business, ArmorThane helps you select the materials and application equipment that fits your plans.

Trailers are specifically designed for easy access with all of the tools needed to produce high-quality ArmorThane coatings. A gas generator even allows you to bring power to any site.

Image result for mobile coating units

While No Two Trailers are Alike, Here are Some Features of One-Compartment and Two-Compartment MCUs:

  • Rear Ramp Entry Door
  • Optional Separated Equipment Room
  • Exhaust Fans for Equipment Room
  • Spray Gun Access Door
  • Ventilated Generator System
  • Multiple Regulated Air Drops
  • Multiple 110V and 230V Power Connects
  • Propane or Electric Trailer/Material Heat
  • Coated Interior for Scratch Protection
  • Shore Power Switch
  • Outside Fill Fuel Tank
  • Refrigerated Dry Air
  • Side Entrance Door into Optional Equipment Room
  • Optional Internal Wall for Sound Reduction, Insulation
  • Propane Travel Racks for Propane Heat
  • Reinforced Hose Hangers
  • Hose Connection Impact Guard
  • Proportioner Impact Guard
  • Wall-Mounted Tool Cabinets
  • Work Bench with Gun Vise
  • Eye Wash Station
  • First Aid Kit
  • Fire Extinguisher
  • Optional Exterior Graphics

Secondary containment pit coating

Plus we provide all of the polyurethane, polyurea and hybrid coating products, primers, sealers, topcoats, spray guns, tools and supplies you need.

Several Questions Help Us Make Key Design Recommendations

We want to help you make the right decisions. When you talk with us, we’ll ask questions regarding:

  • Type of Spraying Projects
  • Spraying Environment (Temperature, Humidity)
  • Spraying Distance from the Trailer
  • Tools and Equipment Used
  • Access to Power, Cost of Power
  • Equipment Noise, Heat
  • Ventilation Required
  • Site-to-Site or Fixed Locations






You get:
• Industry Leading Components
• Turn Key Generator Powered Unit
• Open and Closed Cell Spray Foam
• Fresh Air and Safety Systems
• Climate Controlled Mobile Storage

Heated Hose Rack
Holds up to 410 ft. of hose. Designed with no sharp edges to tear or fray protective scuff jacket. Includes mounting bracket for heated hose circulation manifold.
Fit and Finish
Interior of trailer is lined with a white laminated plywood (not just painted). White aluminum trim in corners keeps the fluid and air hoses concealed for a clean and professional look.
Fully Insulated
ArmorThane Mobile Rigs are fully insulated with sprayed polyurethane foam for the best insulation while adding structural strength to the trailer.
Trailer Specs
Trailer manufactured by United Trailers with 7.5 ft. tall interior height, double I-beam construction with support studs on 16 inch centers. Includes rear bogey wheels, and is backed with a 5 year warranty.
Work Bench and Cabinet
Galvanized steel work bench with vise, grinder and overhead white aluminum locking cabinet.
Barrel Braces
Engineered to hold two or three sets of material securely for a mobile application.
Generator/Air Compressor All rigs come with generators and air compressors from leading manufacturers and are approved installations backed by warranty.
Separated Utility Room
Generator is installed in separate utility compartment, sealed from the spray/work space — reducing noise and exposure to emissions.


1.

CHOOSE A TRAILER OR BOX TRUCK
Image result for mobile coating unit
  • ft (8.5m) gooseneck trailer (8 ft / 2.4m height)
  • 20 ft (6m) tag-along trailer (8 ft / 2.4m height)
  • 16 ft (5m) tag-along trailer (7 ft / 2.1m height)
  • Box truck
  • Sea containers
  • 53 ft (16m) trailers for roofing and Xtreme Mix
    All trailers and box trucks include:

  • Proper ventilation. Engineered louver system designed to keep the generator from overheating
  • Color-coded drum restraints
  • Insulated partition wall between utilities and cabin. This separates the generator from the proportioner – reducing noise during operation
  • Electrical system with control panel
  • Hose hanger (up to 410 ft /125m capacity)
  • 1/4 in (.635cm) plywood walls, double 3⁄4 in (1.9 cm) plywood flooring (trailers only)
  • Heavy-duty 8 in (20.3 cm) main beam construction (trailers only)
  • Custom barrel brace set
  • Two ABC approved fire extinguishers
  • Deluxe first aid kit

2.

CHOOSE YOUR SPRAY EQUIPMENT
    Proportioner:

  • Reactor® H-40
  • Reactor H-25
  • Reactor E-30
  • Reactor E-20
  • Reactor H-XP2
  • Reactor E-XP2
  • Reactor A-20
  • Xtreme Mix™
    Gun Package:

  • Fusion® Air Purge
  • Fusion Mechanical Purge
  • Gusmer® GX-7
  • GX-8
  • GX-DI
  • Gap Pro
  • D-Gun
  • XTR Gun
  • Flex Plus™ Gun
    Hoses:

  • 2000 psi
  • 3500 psi
  • 5000 psi
  • 7250 psi (Water-jacketed hose available)

3.

CHOOSE A GENERATOR
  • 40 KW diesel
  • 60 KW diesel
    Generator packages include:

  • Installation and wiring
  • E-stop
  • Hardware
  • Shut down alarms
  • Correct sizing for application

4.

CHOOSE YOUR AIR EQUIPMENT
  • Rotary screw compressor (40 cfm) integrated with generator saves valuable floor space (60 cfm model is optional)
  • 5 hp Champion compressor (17.5 cfm)
  • 5 hp Champion compressor (Vertical) (17.5 cfm)
  • 10 hp Champion compressor (35 cfm)
    All air systems include:

  • Installation and plumbing
  • Refrigerated dryer – 225°F (107°C) inlet temperature ensures proper air drying in any climate
  • Filtration
  • Regulators
  • Quick disconnects
  • Correct sizing for application